Detroit Diesel SPN 110 FMI 0: Significado, Causas y Solución

Symptoms include unexplained coolant loss with no visible external leak, white steam from the exhaust, rising oil level on the dipstick (coolant mixing with oil), and a sweet smell from the exhaust. A block test (combustion leak detector) will confirm exhaust gases in the coolant. EGR cooler failure is common on Cummins ISX15 and Detroit DD15 engines above 400,000 miles.

If the coolant level was simply low from normal consumption, topping off may resolve the code. However, if the coolant loss is due to a leak, the level will drop again quickly. Monitor the coolant level daily after topping off. If you lose more than 1 gallon in 1,000 miles, there is an active leak that must be found and repaired before it leads to overheating and engine damage.

Most modern heavy-duty diesel engines use Extended Life Coolant (ELC) meeting ASTM D6210 or CAT EC-1 specifications. Common brands include Fleetguard Compleat, CAT Extended Life, and Shell Rotella ELC. Never mix conventional (green) coolant with ELC — they are incompatible and can form gels that clog the radiator and EGR cooler. Always follow the OEM specification for your engine.

Yes, this is a classic symptom of a thermostat sticking closed and then snapping open. When the thermostat sticks, coolant stops circulating and temperature rises rapidly; when it finally opens, the temperature drops quickly. This cycling pattern will continue and gets worse over time. Replace the thermostat promptly — a fully stuck-closed thermostat causes rapid overheating and potential head gasket failure.

Replace coolant hoses every 4–5 years or 300,000–400,000 miles, whichever comes first, even if they look fine externally — internal deterioration is not visible. Replace the thermostat preventively at 300,000 miles. A preventive thermostat and hose replacement costs $200–$500, while a roadside overheating event from a failed thermostat can cause $5,000–$20,000 in engine damage.

No. Esta es una falla de nivel DETENER MOTOR. Continuar operando causará daños severos al motor, incluyendo posible falla catastrófica. Deténgase de manera segura y diagnostique antes de reiniciar. Remolque el vehículo a un taller si no puede identificar y resolver la causa raíz en la carretera.

1) Deténgase en el primer lugar seguro — use luces de emergencia y triángulos reflectantes si está en el arcén de una autopista. 2) Apague el motor. 3) Verifique problemas obvios: fugas de fluidos, humo, conexiones sueltas, olores inusuales. 4) Escanee códigos de falla secundarios usando la pantalla del tablero o herramienta de diagnóstico. 5) Llame a asistencia en carretera si no puede resolverlo. No intente llevar el vehículo al taller por sus propios medios.

Ignorar un código DETENER MOTOR puede resultar en: falla del turbocompresor ($3,000–$8,000 USD), agarrotamiento del motor que requiere reconstrucción completa ($15,000–$40,000 USD), o riesgo de incendio por fuga de combustible/aceite sobre componentes calientes del escape. Si este código aparece junto con baja presión de aceite o alta temperatura del refrigerante, la falla del motor puede ocurrir en minutos.